ACC - JCC - Italcementi Group

Masonry Cement : Orange Lotus Brand

Orange Lotus Brand is the premium Masonry Cement manufactured in compliance with ASTM C 91 type S

This brand of cement is a blend of portland cement and finely ground limestone, combined with various process additions that enhance water retention, workability, boardlife and durability. They are special product for plastering and brick laying. It cement mortar generate a very small micron of Magic bubble given easily apply for final smooth appearance with provide 30% higher spread area than normal mixed cement mortar.

Produt Specification

Mix proportion for application

Type of application	cement	Sand	Water
Brick laying	1 bag	12 bucket (coarse sand)	3 bucket
1st coat plastering	1 bag	12 bucket (fine sand)	3 bucket
2nd coat plastering	1 bag	16 bucket (fine sand)	3.5 bucket

Recommendation

Water in mix proportion should be adjusted depends on volume of moisture in sand.
Brick for laying should be clean and saturated with water to keep a good bond between brick and cement mortar.
Remove dust and dirty from surface and wet with water before plastering. Concrete surface should be blast or apply glue cement-sand mortar before plastering.
Wall surface should be cured with water to keep a strong hard surface and reduce surface cracking.